 |
Stk
# 1304: NEWMAN FULLY AUTOMATIC LABELLING SYSTEM: MODEL CTE
250 CARTON LABELLER
The Newman CTE 250 is a fully automatic labelling system which
applies a self- adhesive tamper evident labels (security labels)
to erected cartons. The machine's compact design permits easy
integration into existing packing lines. Year of manufacture
1994. |
 |
Stk
# 1301: HARLANDS LABELLER, MODEL "SIRIUS"
Front and back double sided self adhesive wrap round labeller.
Year of manufacture 1993. |
 |
Stk
# 1299: KING SCREW CAPPER, MODEL: CS120 A CONTINUOUS MOTION
4 HEAD SCREW CAPPER |
 |
Stk
# 1265: LADY PACK MODEL 45/SL2 'L' SEALER & HEAT TUNNEL
As New. |
 |
Stk
# 1241: PESTER PEWOPACK OVERWRAPPER MODEL 450SN
Fully meets GMP requirements. |
 |
Stk
# 1182: UHLMANN UPS 200 BLISTER PACKER
Arranged for hand feeding, complete with a choice of change
parts for tablets and capsules. |
 |
Stk
# 1149: KALFASS INTEGRATED L SEALER AND SHRINK TUNNEL
Type 5050. |
 |
Stk
# 1146: M.A.R BOTTLE BLOWING MACHINE
Model MSC 20. |
 |
Stk
# 1124: FARMOMAC 8 HEAD ALUMINIUM OVERSEALER FOR VIALS
Model F550
|
 |
Stk
# 4000: FARMOMAC 8 HEAD ALUMINIUM OVERSEALER FOR VIALS
MODEL: F550. Rotary continuous automatic motion machine. Bottles
are fed in on a conveyor. Complete with Vibratory Bowls &
Rotary Table Fitted with safety interlock guarding and finished
in stainless steel. Output up to 9000 vials per/hr. Size Range:
Height from 54mm to 74mm. Diameter from 22mm to 30mm. Electrics:
400-440 Volts 50 Cycles Weight = 1300Kg |
 |
Stk
# 4004: PESTER 'PEWOPACK' OVERWRAPPER MODEL 450SN
Collator / sleever / shrink wrapper for bottles.
Operation:
Stretchwrapping with subsequent shrinking of single or multi-packs
with PE-film.
Products:
Cartons, cans, bottles, aerosol cans, blisters, and so on.
Design:
Compact and solid modular design, integrated pneumatic and
electrical cabinet. Aluminium table surface, dynamically
stressed parts are weight-optimized. Hardened shafts with
ball bearings. All surfaces are made of corrosion-resistant
material. The machine fully meets the GMP requirements.
Large-sized guard doors. The machine is designed and built
according to the CE-specifications.
Two
metres infeed slat conveyer with Gronmeyer device for channelling
bottles from one lane into two lanes thus doubling the speed.
- 40/min single lane; 80/min twin lane conveyer.
Change
parts for size 100ml & 140 ml bottles. 90 degree pusher
collates the bottles into rows. Groups currently handled
by this machine 12 ( 4 x 3 ) and 20 ( 4 x 5 ) Machine manual
available. Fully safety guarded.
Electrics:
415V/3/50Hz
Date
of manufacture August 1988
|
 |
Stk
# 4005: KING TB4 GMP ELECTRONIC TABLET COUNTER WITH ATLC
Complete with ATLC automatic, pneumatic container feed system.
Variable speed up to 40 containers per minute (depending upon
product and container). Fitted with mains on/off, variable
speed controls for tablet feed, electronic counter indicator. |
 |
Stk
# 4007: KING CS 120 CONTINUOUS - MOTION 4 HEAD SCREW CAPPER
A
full assortment of change parts available ranging from 30-70mm
diameter with a 1.5m variable speed conveyor & 1m conveyor
fitted with a 360mm rotary table. Fully stainless steel
construction with fully interlocked guarding, built to GMP
standards, Mechanical cap feeders, Air operated, positive
cap pick-up chucks to apply side grip pressure no cap/no
bottle detection.
Output:
120 packs per minute.
Motor:
1 HP.
Bottle
Diameter ranging from: 18 -105mm.
Bottle
Height: 50 - 305mm.
Cap
Diameter: 10 - 50mm.
Cap
Height: 9 - 30mm.
Net
Weight: 1150 Kg.
Gross
Weight: 1350Kg.
Year
of manufacture 1999.
|
 |
Stk
# 4009: CAM AUTOMATIC BLISTERPACKER MODEL M82/2
Production:
up to 540 blisters per minute depending on format size.
Mechanical
speed per minute i.e. Strokes per minute: up to 55.
The
stroke length ranges from: Minimum 115mm to Maximum 155mm.
Size
Range: Minimum 90mm to Maximum 255mm.
Blister
Length 60mm. Blister Width ranges from 30mm to 85mm. Forming
Depth ranges from 3mm to 12mm. Number of Blisters per cycle
ranges from 1 to 12 Blisters.
Power
absorption: 15Kw
Air
Consumption: 500
Gross
Weight: 3200kg
Dimensions:
H: 1800 x W: 1365 x L: 4810
Year
of Manufacture 1986
|
 |
Stk
# 4014: NORDSON DURABLE 4L MOBILE GLUING MACHINE
Used
in conjunction with Nordson hot melt hoses and guns to create
a hot melt application system. The melter liquifies solid-form
hot melt and maintains the hot melt at the desired temperature.
When the guns are activated, the melter pumps the liquified
hot melt through the hoses and out the gun nozzles, where
it is commonly applied to the surface of a product.
DuraBlue
melters are specifically designed to:
i) melt
& pump solid-form hot melt materials that are engineered
to be liquified and extruded at temperatures below 230ºC
(450ºF) for 240 VAC melters or below 200ºC (400ºF)
for 120 VAC melters
ii)
Be used with compatible hot melt hoses and guns that are
manufactured by Nordson Corporation
iii)
be used in non-explosive environments
DuraBlue
melters should not be used i) to melt or pump polyurethane
reactive hot melt materials or any other material that creates
a health or safety hazard when heated ii) in environments
that will require the melter to be cleaned using a water
wash or spray
Serial
No: AN03L01494
Electrics:
240V IP32
|
 |
Stk
# 4017: HARLANDS SIRIUS LABELLER
A
front and back double sided self adhesive wrap round labeller,
fitted with a variable speed plastic slat conveyor, patch
labeller with wrap round unit and scroll feed and bottle
guides & product detection & missing product sensors,
Overhead stabiliser unit removable reject bin, Air supply
filter / regulator 80psi capacity approx 60 units per min.
The base unit consists of fabricated steel frame clad with
stainless steel support plates. Electrical supply: 240v
/ Phase 1 / 50Hz via mains supply. Year of manufacture 1993.
|
 |
Stk
# 4019: KING LH5 FULLY AUTOMATIC LABELLING MACHINE FITTED
WITH ARGUS 3 BAR CODE READER
Applies
pressure sensitive labels to all shapes of containers including
plastic, glass & aluminium etc.The basic machine will
label round containers, single panel labels on square or
rectangular containers and spot labels on oval shaped examples.
Containers
of up to 153mm diameter by 254mm high can be handled in
the standard set-up giving a wide range available for labelling.
Electrical
requirements: 2 KW
Container
handling range: Diameter - 20mm to 150mm Height - 20mm to
250mm
Output:
Up to 300 per minute
Net
weight: 750kg Gross weight: 900kg
Case
size: 300cm x 130cm x 170cm
Year
of manufacture 1988
|
 |
Stk
# 4021: KUGLER AUTOMATIC MODEL: K 705 - S8 8 HEAD SCREW
CAPPER WITH A SIEMENS PLC CONTROLLER
Fitted
with a scroll infeed & vibratorybowl cap feeder.
Capping
heads: 8
PLC:
SIEMENS CP6
Working
direction: left to right
Setings
range: 4,200 / 16,800 units per hour
Effective
output: 9,000 units per hour
Power
consumption: 3 phase - 230 / 240v - 50Hz
Year
of manufacture: 1998
|
 |
Stk
# 4023: QUALISEAL LABORATORY CAPSULE SEALING MACHINE
The
Qualiseal is designed to seal the joined portion of the
cap and body of filled hard gelatine capsules.
Capable
of sealing capsules sizes: 00, 0, and 1,2,3,4
Power:
115 VAC 50/ 60 Hz 3 Amps
Dimensions:
Width: 737mm x Depth: 304mm x Height: 305mm
Weight:
30kg
Year
of manufacture: 1999
|
 |
Stk
# 4027: AUTOMATED PACKAGING HS-100 EXCEL BAGGING UNIT
The
HS 100 - EXCEL bagging unit feeds empty polythene bags mounted
on a roll into the bagging area. The unit is intended to
feed, open, seal, and separate poly bags. At the bagging
area the bag is opened by a pulsed jet of compressed air,
filled with product(s) and sealed.
In automatic
mode the bags are filled and sealed automatically. In manual
mode the bags are filled manually and the sealing function
is activated by means of a foot switch. Bag sealing occurs
when the pressure bar compresses the top of the bag against
a teflon covered heating element.
The
unit requires a air supply of 80 PSI (5.5 bar)
The
unit can be ser to use either 110 or 240 Volt electrical
power supplies.
|
 |
Stk
# 6001: VIDEOJET EXCEL 170i INKJET PRINTER
A
continuous stream, non-contact ink jet printer. The Series
1701 UHS can code virtually any surface, texture, contour
or shape. Printing is controlled through the built in keyboard
allowing a wide variety of print features including: one,
two, or three lines, Upper and lowercase letters, store
messages, multistroking (offering varying bold single-stroked
lines), reverse print, inverted print, current time and
date / auto expiration date, print a bar code, insert a
graphic character or design, print a serializer (successive
numbering), print a code in the same location on each product,
regardless of product etc.
Electrics:
100-240V - 2-1amps - 50/60Hz - single phase.
Air
Requirement: 100 psi / 6.9 bar.
Year
of Manufacture: 1999
|
